Gator Xturf Infill Sand Gator Green
Helps keep turf blades upright.
Provides a rich, thick and natural healthy appearance.
Gator Green Infill will
match or blend in with all artificial turf colors.
- Holds artificial turf in place (1.5-3.0 lb/ft2)
- Superior gradation for drainage
- Rounded, green coated natural sand
- Resist mildew
- Reduces risk of injury
- Safe for children and pets
- Environmentally safe
- Mesh size 12-20
- In the fall, remove any remaining leaves and other debris with the help of an artificial turf rake. Adding a fresh coat of GATOR XTURF INFILL SAND GATOR GREEN as needed.
- In the spring, straighten the blades flattened by snow, remove any pet waste and water down the dirty grass blades. When dry, add in a layer of GATOR XTURF INFILL SAND GATOR GREEN.
- Adding a fresh coat of GATOR XTURF INFILL SAND GATOR ZEO-WHITE as needed.
- For your Putting Green: Vacuuming your Putting Green and adding a coat of GATOR XTURF INFILL SAND GATOR GREEN as needed before your next hole in one.
- Artificial turf for landscape
Ideal for residential landscape artificial turf systems with blade (pile) height from 1 to 2”. Quantity suggested varying from 1.5-3 lb/ft2 (7.3-14.6 kg/m2). A higher turf blade (pile height) will need more infill sand. For landscape artificial turf, each 50 lb (22.7 Kg) bag will cover from 33.3 to 16.7 ft2 (3.1 to 1.6 m2). - Golf putting green
Also recommended for golf putting green having pile height < 1”. Quantity suggested varies from 0.5-1.5 lb/ft2 (2.36-7.3 Kg/m2).
N.B. Always refer to the latest GATOR XTURF INFILL SAND Technical Data Sheet (TDS) at AllianceGator.com before installing any of the GATOR XTURF INFILL SAND products.
- Grade Profile
- Grain size: 12/20 mesh
- Grain Shape: Sub round
- Grain Color: Gator Green (forest green)
- Physical Properties
- Hardness (Mohs scale): 6.5-7
- Bulk Density (ASTM C29): 90-105 lb/ft3
- Specific gravity or relative density (ASTM C128-07a): 2.65
- Moisture content or evaporable moisture (ASTM C566-97) : <0.5%
- Colorfastness / UV Stability (ASTM G155): Pass
- Weatherability Xenon Arc Light (ASTM G155): Pass
- Melting Point: 3 100°F
- Chemical analysis
- SiO2 (Silicon Dioxide): 99.8%
- Al2O3 (Aluminium Oxide: 0.040%
- Fe2O3 (Iron Oxide): 0.015%
- TiO2 (Titanium Dioxide): <0.01%
- CaO (Calcium Oxide): <0.01
- MgO (Magnesium Oxide): <0.01%
- Na2O (Sodium Oxide): <0.01%
- K2O (Potassium Oxide: <0.01%
- Chemical resistance (Liquid immersion for 18 hours in each chemical)
- Aluminium Sulfate (25%): No reaction
- Ammonium Hydroxyde (28%): No reaction
- Chlorine Bleach (15%): No reaction
- Hydrochloric acid (100%): No reaction
- Industrial resistance (100%): No reaction
- Mineral Spirits (100%): No reaction
- Sodium Carbonate (40%): No reaction
- Trichloro-s-trianzenetriol (10%): No reaction
- Trisodium phosphate (40%): No reaction
- Water (100%): No reaction
- Xylene (100%): No reaction
| Product | Size |
|---|---|
| GATOR XTURF INFILL SAND GATOR GREEN | 22.7 Kg (50 lb) plastic bags |
Installation Instructions
STEP 1 APPLY GATOR XTURF INFILL SAND
-
Work in straight lines to ensure total coverage across the entire GATOR XTURF surface. A drop spreader with an adjustable spread rate is the best tool for creating a consistent infill layer. However, pay attention to the rows with the spreader as it will absorb into the GATOR XTURF while being dropped.
-
Use a shovel to fill the edges and corners of your GATOR XTURF. Consistent speed and quantity throughout is key. The smoother you spread it, the smoother your final surface will feel underfoot. Apply your infill material in a thin layer each time.
-
GATOR XTURF INFILL SAND GATOR GREEN is the primary infill ingredient for the first layer of infill. The green color makes it a beautiful choice. For pet playgrounds, GATOR XTURF INFILL SAND GATOR ZEO-WHITE is generally considered the best topping infill to use to help eliminate and minimize odor. GATOR XTURF INFILL SAND GATOR ZEO-WHITE is also very porous, which helps to keep your GATOR XTURF cooler in direct sunlight compared to rubber infill options. Artificial turf systems with blade (pile) height from 1 to 2″. Quantity suggested varying from 1.5-3 lb/ft2 (7.3-14.6 kg/m2).
STEP 2 BROOM THE GATOR XTURF
To get your infill layer to drop completely, you will need to brush the GATOR XTURF blades back with the help of a stiff bristle broom, turf rake or Power Broom. Never use a metal leaf rake, as it may damage the artificial turf blades. Keep firm pressure and walk backwards slowly as you work the infill deep into the GATOR XTURF. Work in rows and overlap your passes. It is also recommended to brush north-south and east-west to ensure that all GATOR XTURF INFILL SAND GATOR GREEN is no longer visible and that all the blades are standing vertically.
To complete the project, blow out any remaining GATOR XTURF INFILL SAND GATOR GREEN and/or cut blades left on the surface using a leaf blower.
N.B. After brooming and blowing, lightly mist with water to remove static. This will also help the GATOR XTURF INFILL SAND GATOR GREEN to drop in place and keep the blades upright.
