Gator Rust Remover

For concrete pavers, wet cast and natural stones

APPLICATION INSTRUCTIONS

PLEASE NOTE
  • Do not let product dry up on paver surface.
  • Wear goggles and rubber gloves.
  • After using the GATOR RUST REMOVER on various spots, clean the entire paver surface with Gator Efflorescence Cleaner for an overall uniform color.
  • FAQ (Prior use of other cleaners may inhibit performance. Visit Gator Clean FAQ page for cleaning tips.)
STEP 1
Apply product on stain.
STEP 2
Let it soak for 2-3 minutes.
STEP 3
Scrub with a hard bristle brush.
STEP 4
Rinse thoroughly with water.
STEP 5
Repeat steps 1 to 4 until the stain dissolves.

ALLIANCE DESIGNER PRODUCTS INC. cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation of ALLIANCE DESIGNER PRODUCTS INC. is to refund the purchase price. Proof of purchase is required for any claim. ALLIANCE DESIGNER PRODUCTS INC. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, ALLIANCE DESIGNER PRODUCTS INC. excludes any implied warranty of quality, merchantability or fitness for purpose.

*Please store container at above 32°F / 0°C.

POLYMERIC SAND
FOR DUMMIES

Tue. 1/23
1PM EST

Live Broadcast
Gator Studio