Maximum joint width: 6″ (15 cm)
Install the wet cast or natural stones on a maximum 1″ (25 mm) bed of sand. Make sure that there is at least 6″ (15 cm) of compacted crushed stone under the bedding sand. See diagram 1.
Make sure the wet cast or natural stone top and side surfaces are dry.
FOR NATURAL STONES: Using a hard-bristle broom, sweep POLYBIND DUST in between the full depth of the natural stone joints.
FOR WET CAST STONES: Using a scoop, carefully pour POLYBIND DUST in between the full depth of the joints and avoid getting any POLYBIND DUST on the wet cast stone surface.
Hit the wet cast or natural stones with a rubber mallet; this will make the POLYBIND DUST settle firmly into the joints by removing any air pockets. Repeat step 2 and this step 3 at least two more times.
Using a soft, fine-bristle broom, sweep all excess POLYBIND DUST off wet cast or natural stone surfaces. Ensure that POLYBIND DUST lies at least 3 mm (1/8″) below the top of the wet cast or natural stones or erosion may occur.
Using a leaf blower, blow all POLYBIND DUST residues off wet cast or natural stone surfaces.
When the entire surface is done, rinse off any POLYBIND DUST residue off the surface.
THE PARTIES AGREE THAT REFUND OF THE PURCHASE PRICE AS STATED IS THE ONLY OBLIGATION OF THE MANUFACTURER. IN ALL EVENTS, THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES OR COSTS WHATSOEVER, (INCLUDING REMOVAL OR REINSTALLATION OF SAND OR PAVERS) DIRECT OR CONSEQUENTIAL. TO THE EXTENT PERMITTED BY LAW, THE MANUFACTURER EXCLUDES ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY OR FITNESS FOR PURPOSE. ALLIANCE DESIGNER PRODUCTS INC. excludes any responsibility whatsoever for the presence of moss, mold, mildew, or similar factors that may occur on the product after its installation. The presence of moss, mold or mildew is caused by the particular on-site conditions, including excess moisture, shade, absence of ventilation, inadequate cleaning or maintenance, presence of soil or other organic debris left on the product after installation. ALLIANCE DESIGNER PRODUCTS INC. excludes any responsibility for use of POLYBIND DUST for any installation not installed to manufacturer’s specifications.
Please note that when the product is used for other purposes (Mixed-use, commercial, institutional or other), the above terms apply except that the applicable period is reduced to 1 year from purchase. Alliance Gator excludes any responsibility for use of any Polybind Dust for any installation not installed to manufacturer’s specifications.